• Mon - Sat: 8AM - 5PM
(202) 831-4869
Free Estimate

Best Restaurants to Eat In DC 20003, Capitol Hill, Navy Yard, Southeast

The Capitol Hill, Navy Yard, and Southeast neighborhoods in Washington, DC 20003 offer a diverse and vibrant dining scene, with everything from upscale eateries to casual spots that cater to all tastes. Whether you’re looking for a fine dining experience or a laid-back meal with friends, here are 10 of the best restaurants to eat in these areas.

1. Ambar

ambar restaurant dc

Ambar offers a unique dining experience with its modern Balkan cuisine, served in a chic and inviting atmosphere. The restaurant is known for its all-you-can-eat small plates option, allowing you to sample a wide variety of flavors.

Must-Try Dishes

  • Balkan kebabs
  • Lamb pate
  • Cheese pie

Location

2. Rose’s Luxury

Rose's Luxury DC

Located on Capitol Hill, Rose’s Luxury is an eclectic and vibrant restaurant that serves creative small plates with global influences. The lively atmosphere and exceptional service make it a must-visit spot in the area.

Must-Try Dishes

  • Pork and lychee salad
  • Smoked brisket
  • Popcorn soup

Location

3. Osteria Morini

Osteria Morini DC

Osteria Morini in Navy Yard brings the flavors of Northern Italy to DC. The restaurant’s warm and rustic ambiance pairs perfectly with its menu of handmade pastas, grilled meats, and fresh seafood.

Must-Try Dishes

  • Cappelletti pasta
  • Branzino alla griglia
  • Polpette di pollo (chicken meatballs)

Location

4. The Salt Line

The Salt Line DC

Situated along the Anacostia River in Navy Yard, The Salt Line is a popular seafood restaurant that combines New England-style dishes with Chesapeake Bay flavors. Enjoy fresh oysters, lobster rolls, and a picturesque waterfront view.

Must-Try Dishes

  • Lobster roll
  • Raw bar oysters
  • Crispy skin rockfish

Location

5. Belga Café

Belga Café DC

Belga Café on Capitol Hill offers a taste of Belgium with its menu of hearty dishes and Belgian beers. The cozy and casual atmosphere makes it a great spot for brunch, lunch, or dinner.

Must-Try Dishes

  • Mussels with Belgian fries
  • Belgian waffles
  • Beef carbonnade

Location

6. Albi

Albi Restaurant DC

Albi, located in the Navy Yard, is a modern Middle Eastern restaurant that draws inspiration from the Levantine region. The menu features a variety of dishes cooked over an open hearth, with bold flavors and fresh ingredients.

Must-Try Dishes

  • Grilled lamb kebabs
  • Spicy hummus
  • Flatbreads with za’atar

Location

7. Ted’s Bulletin

Teds Bulletin DC

Ted’s Bulletin is a Capitol Hill favorite, known for its comfort food and nostalgic atmosphere. The menu features classic American dishes, from hearty breakfasts to delicious dinners, all served in a retro-style diner setting.

Must-Try Dishes

  • Homemade pop-tarts
  • Chicken and biscuits
  • Milkshakes

Location

8. Anafre

Anafre DC

Anafre in Southeast DC offers a unique twist on Mexican coastal cuisine. The menu is filled with fresh seafood dishes, grilled meats, and house-made tortillas, all inspired by the flavors of the Mexican coastline.

Must-Try Dishes

  • Grilled octopus
  • Tacos al pastor
  • Ceviche mixto

Location

9. Chloe

Chloe Scott DC

Chloe in Navy Yard is a modern American restaurant that features a globally inspired menu with a focus on seasonal and locally sourced ingredients. The inviting atmosphere and creative dishes make it a standout in the neighborhood.

Must-Try Dishes

  • Wagyu beef tartare
  • Grilled octopus
  • Ricotta gnocchi

Location

10. Navy Yard Oyster Company

Navy Yard Oyster Company DC

Navy Yard Oyster Company is a go-to spot for seafood lovers in the Navy Yard neighborhood. With a focus on sustainable seafood, the restaurant offers fresh oysters, clams, and other seafood dishes in a relaxed setting.

Must-Try Dishes

  • Oysters Rockefeller
  • Crab cakes
  • Seared scallops

Location

These 10 restaurants in Capitol Hill, Navy Yard, and Southeast DC offer a wide range of dining experiences, from upscale seafood to cozy comfort food. Whether you’re in the mood for international flavors or classic American dishes, these neighborhoods have something to satisfy every palate.

On Key

Related Posts

The tile used on his bathroom is an unterminated or hexagonal tile with an embossed texture. Unlike most wall tile installations which terminate all the way up at the corner of the joint between the wall plain or have a termination strip, this tile is installed with a raw staggered edge. Sometimes an edge like this is called a floating edge. If you look in the picture below, you can see that the tile at the vertical inside corner of the wall is cut to fit the shape provided by the wall plane. The top of the tile though is left raw to just follow a staggered edge of the hexagonal tile itself. The staggered unterminated edge of the tile doesn't necessarily look bad, in this example. They've been careful during installation to not let mortar ooze out in a way that looks rough or unfinished. At the lower tiles though, in the picture below, you can see the top of that unterminated edge. There are two problems with that kind of unterminated edge. First, you can see the raw edge of the tile itself. Since this is not a solid piece of natural material, the front or exposed face of the tile is a different color than the internal composition or body of the tile. When it's exposed like this and doesn't have a terminating edge you can see that difference which makes it visually apparent that it's not a real material. It's a manufactured material. The second problem with this type of unterminated edge is that the mortar itself has a thickness of roughly 1/8 of an inch. When applied with a 3/16 inch Notch trowel, the mortar becomes compressed but still even when flattened as much as possible there still is a thickness of that mortar. Once it is dry and cured, you can still see the thickness of that mortar. In almost all cases of tile installation, unlike stone masonry or even brick masonry, the tile mortar is not intended to be exposed at the joints. In between joints, in the field of the tile, the mortar will be covered with a colored grout. In this case, the tiles are set so tightly that there is almost no visible grout line between them. The grout used is a color that's very similar to the tile and the effect works. In some cases when the tile has a variation of significant color difference between the ranges of colors within the tile it's difficult to have a grout that complements or blends. Here though because the colors continuous across the face of the tile and the grout has been matched so well, you can't even hardly notice it. You can see that joint or between the back of the tile and the wall very clearly in the next picture below. You can see there's a very thin line with a black dark shadow between the tile and the wall. In some cases, when a tile is left unterminated at the edge, a gun applied caulking can be applied across the edge, smoothed, to almost make it look intentional. Sometimes in bathrooms without really good ventilation, if there's steam from hot water, that steam can condensate and build on the wall. When the vapor droplets accumulate enough they'll roll down the wall and in this case they'll sit on top of and get back behind the edge of the tile. That's one of the downsides, here though, this bathroom is just like a powder room with a toilet and a sink, but it doesn't have a shower. Most of the steam moisture buildup in bathrooms comes from showers. In the picture below you can see the distance between the other side of the ceiling and the top of the tile. Here they were at least smart enough to bring the top of the tile to a point that's above eye level. Typical eye levels are around 60 to 75 inches above the finished floor height. The mirror used above the bathroom sink has an integral LED light that wraps the perimeter of the round mirror. It basically provides a dramatic high contrast to the adjacent tile. That high contrast accentuates the texture of the tile. This tile has this intentional embossed or relief texture which is well employed when lit in a way that emphasizes the texture. The next picture below shows a close-up view of that edge at the top of the tile. Dupont Kitchen & Bath Can Help As dedicated and local DC metropolitan kitchen and bath builders and installers, we pride ourselves on turning your visions into reality. Your kitchen and bathrooms can reflect your unique style and be designed with personalized aesthetics. It can be a process from creative designs to the realization of your dream space. Specializing in kitchen and bath construction, we bring expertise and skills to every project. If you're contemplating a renovation, upgrade, or modernization in the local market, we're happy to be your team. Consult with us, and we can start together on a path to redefine and elevate your DC living experience. You can visit our company website at https://dupontkitchenbathdc.com/ Here at our website you will find a simple and convenient web form that you can fill to contact us quickly.

Hex Wall Tile

Modern Hex Wall Tile for Bathrooms in Washington DC The tile used on his bathroom is an unterminated or hexagonal tile with an embossed texture.

  • HAVE ANY QUESTIONS RELATED? CONTACT US IMMEDIATELY
Contact Us
Quality and customer service is how we grow our business, we listen to you and then we get to work.

SERVICES

REFER-A-FRIEND

Contact Us
Facebook Instagram Linkedin

CONTACT US

Meet In Timeline.

  • Hours: Thursday 8AM-5PM
  • Friday 8AM-5PM
  • Saturday8AM-5PM
  • Sunday Closed
  • Monday 8AM-5PM
  • Tuesday 8AM-5PM
  • Wednesday 8AM-5PM

CONTACT US!

Privacy Policy | Contact US

© Copyrights 2026. All Rights Reserved.

MENU

ADDRESS

CONTACT NUMBER: